Controlling The Power Supply To The Printer Using Web Config; Restore Default Settings - Epson WF-C5890 Series User Manual

Administrator Information
Related Information
"Default Value of the Administrator Password" on page 19
&
"Periodic Cleaning:" on page 394
&

Controlling the Power Supply to the Printer Using Web Config

You can turn off or restart the printer from a computer using Web Config even when the computer is located
remotely away from the printer.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Device Management tab > Power
4. Select Power Off or Reboot
5. Click Execute.
Related Information
"Default Value of the Administrator Password" on page 19
&

Restore Default Settings

You can select the network settings or other settings stored in the printer and restore these settings to their
defaults.
1. Enter the printer's IP address into a browser to access Web Config.
Enter the printer's IP address from a computer that is connected to the same network as the printer.
You can check the IP address of the printer from the following menu.
Settings > General Settings > Network Settings > Network Status > Wired LAN/Wi-Fi Status
2. Enter the administrator password to log in as an administrator.
3. Select in the following order.
Device Management tab > Restore Default Settings
4. Select an option from the list.
5. Click Execute.
Follow the on-screen instructions.
> >
Managing the Printer
439
Restore Default Settings