Sending Faxes Using A Fax Server - Epson WF-C5890 Series User Manual

Preparing the Printer and Making Initial Settings
Messages
Connection test failed.
Check the settings.
Connection test failed.
Check the date and time on your
product or server.
Authentication failed.
Check the settings.
Cannot access the printer until
processing is complete.

Sending Faxes Using a Fax Server

You can send faxes using a fax server on your network. Configuring the fax server allows you to send an email to
the fax server with the fax data attached, and then send it using your printer's fax function. The fax server sends
the fax using the recipient's fax number included in the e-mail address. When fax server settings are enabled, you
cannot send faxes using LINE port on the printer.
Note:
Before introducing this feature to your network, consult your sales representative for more information. For details on the fax
server, consult the service provider for Internet faxes.
This message appears for the following reasons:
❏ The LDAP server address or the port number is incorrect.
❏ A timeout has occurred.
❏ Do Not Use is selected as the Use LDAP Server.
❏ If Kerberos Authentication is selected as the Authentication Method,
settings such as Realm (Domain), KDC Address and Port Number (Kerberos)
are incorrect.
This message appears when the connection fails because the time settings for the
printer and the LDAP server are mismatched.
This message appears for the following reasons:
❏ User Name and/or Password is incorrect.
❏ If Kerberos Authentication is selected as the Authentication Method, the
time/date may not be configured.
This message appears when the printer is busy.
103
>
Preparing and Setting Up the Printer Accordin
Explanation
...