Epson WF-C5890 Series User Manual page 122
Hide thumbs
Also See for WF-C5890 Series:
- Start here (4 pages) ,
- User manual (438 pages) ,
- Start here (4 pages)
Table of Contents
Advertisement
Preparing the Printer and Making Initial Settings
Making Settings for the Printer's Fax Features According to Use
You can configure the printer's fax features individually using the printer's control panel according to use. The
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
"Fax Settings " on page 377
Note:
❏ Using Web Config, you can configure the printer's fax features.
❏ When you use Web Config to display the Fax Settings menu, there may be slight differences in the user interface and in
location compared to the printer's control panel.
Related Information
"Settings for a PBX Phone System" on page 122
&
"Receiving Incoming Faxes" on page 235
&
"Making Settings When You Connect a Phone Device" on page 123
&
"Settings to Save and Forward Received Faxes" on page 124
&
"Settings to Save and Forward Received Faxes with Specific Conditions" on page 127
&
"Making Settings for Blocking Junk Faxes" on page 132
&
"Making Settings to Send and Receive Faxes on a Computer" on page 133
&
Settings for a PBX Phone System
Making Settings to Use the Access Code when Dialing an External Line
Make the following settings if you need to use numbers such as 0 or 9 as they are instead of as part of an external
access code.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
4. When sending a fax to an outside fax number using the actual external access code, select the Access Code
box, and then select Do Not Use.
5. Select OK to apply the settings.
Making Settings to Send Faxes Using External Access Code (#)
You can send faxes to an outside fax number using # (hash) instead of the actual external access code such as 0 or
9.
1. Select Settings on the printer's control panel.
2. Select General Settings > Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
>
Settings for Printing, Scanning, Copying and Fa
122
...
Advertisement
Table of Contents
Troubleshooting
