Epson WF-C5890 Series User Manual page 449

Administrator Information
Protocol
SNMPv3 Settings
Related Information
"Controlling Using Protocols" on page 447
&
"Protocol Setting Items" on page 449
&
Protocol Setting Items
Bonjour Settings
Items
Use Bonjour
Bonjour Name
Bonjour Service Name
Location
Top Priority Protocol
Wide-Area Bonjour
iBeacon Settings
Items
Enable iBeacon Transmission
SLP Settings
Items
Enable SLP
WSD Settings
Items
Enable WSD
Printing Timeout (sec)
Scanning Timeout (sec)
>
Network Security Settings
Description
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices,
monitoring, etc.
>
Controlling Using Protocols
Setting value and Description
Select this to search for or use devices through Bonjour.
Displays the Bonjour name.
Displays the Bonjour service name.
Displays the Bonjour location name.
Select the top priority protocol for Bonjour print.
Set whether to use Wide-Area Bonjour.
Setting value and Description
Select this to enable the iBeacon transmission function.
Setting value and Description
Select this to enable the SLP function.
This is used such as network searching in EpsonNet Config.
Setting value and Description
Select this to enable adding devices using WSD, and print
from the WSD port. If you do not want this product to search
for devices, disable this item and disable the Enable IPP
item.
Enter the communication timeout value for WSD printing
between 3 to 3,600 seconds.
Enter the communication timeout value for WSD scanning
between 3 to 3,600 seconds.
449