Disconnecting Wi-Fi Direct (Simple Ap) Connection; Changing The Wi-Fi Direct (Simple Ap) Settings Such As The Ssid - Epson EcoTank ET-15000 Series User Manual

Adding or Replacing the Computer or Devices

Disconnecting Wi-Fi Direct (Simple AP) Connection

There are two methods available to disable a Wi-Fi Direct (Simple AP) connection; you can disable all connections
by using the printer's control panel, or disable each connection from the computer or the smart device. This
section explains how to disable all connections.
Important:
c
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in
Wi-Fi Direct (Simple AP) connection are disconnected.
Note:
If you want to disconnect a specific device, disconnect from the device instead of the printer. Use one of the following
methods to disconnect the Wi-Fi Direct (Simple AP) connection from the device.
❏ Disconnect the Wi-Fi connection to the printer's network name (SSID).
❏ Connect to another network name (SSID).
1. Tap
on the home screen.
2. Select Wi-Fi Direct.
The Wi-Fi Direct information is displayed.
3. Tap Start Setup.
4. Tap Change.
5. Select Disable Wi-Fi Direct.
6. Tap the Disable the settings.
7. When a completion message is displayed, close the screen.
The screen automatically closes after a specific length of time.
8. Close the Network Connection Settings screen.

Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID

When Wi-Fi Direct (simple AP) connection is enabled, you can change the settings from
Direct > Start Setup > Change, and then the following menu items are displayed.
Change Network Name
Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary
name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the
control panel. You can enter up to 22 characters.
When changing the network name (SSID), all connected devices are disconnected. Use the new network name
(SSID) if you want to re-connect the device.
>
Connecting a Smart Device and Printer Directly (Wi
263
...
> Wi-Fi