Table of Contents
Advertisement
MultMobile USB User Guide
Features
•
Compliance with major ITU-T, TIA, and EIA international standards to ensure compatibility with
other modems.
•
Caller ID capability can identify a caller's phone number (available only on U.S. products).
•
Limited warranty:
Data
•
Supports the V.90 standard for data transmission speeds up to 56 Kbps while maintaining
compatibility with lower-speed modems.
•
Supports the enhanced ITU-T V.34 standard, with data transmission speeds to 33.6 Kbps.
•
Supports asynchronous data rates at 56K, 33.6K, 31.2K, 28.8K, 26.4K, 24K, 21.6K, 19.2K,
16.8K, 14.4K, 12K, 9600, 4800, 2400, 1200, and 300 bps.
•
Supports automatic fallback to slower speeds in noisy line conditions, and fall-forward to faster
speeds as conditions improve.
•
ITU-T V.42 LAP-M and MNP Class 3 and 4 error correction.
•
ITU-T V.42bis (4-to-1) and MNP 5 (2-to-1) data compression.
•
Automatically disables data compression when transferring already-compressed files.
•
Autodial, redial, pulse (rotary) and touch-tone dial.
•
Dial tone and busy signal detection for reliable call-progress reporting.
•
Compatible with the standard AT command set used by most communication programs.
Fax
•
Supports V.17, Group 3 fax communication standards, allowing it to communicate with other
fax modems as well as with fax machines.
•
Responds to EIA/TIA Class 1 and 2 fax commands, enabling it to exchange editable and
encrypted faxes with Windows 95 computers.
•
Sends and receives faxes from your computer at 14,400 bps, 9600 bps, 7200 bps, 4800 bps,
2400 bps, or 300 bps.
Required Equipment
In addition to the contents of your modem package, you need the following equipment.
•
Computer: Your modem can only be connected to a computer with a USB port.
•
Telephone Line: You must have a telephone line with jack (connector) that accepts the cable
that comes with the modem. If you do not have a telephone jack near your computer, you
should install one before proceeding.
Do-it-yourself telephone extension kits and accessories are available wherever telephones are
sold. You may also hire an independent contractor or your local telephone company to install
an extension. If you want a separate line for your fax modem, you must contact your telephone
company.
•
Communications Software: To operate your modem, you must have data communications
and fax communications software (included with the modem). Data communications software
simplifies control of the modem by guiding you through the process of selecting your serial
port, your port speed, and other variables, and then storing your settings, including frequently
called phone numbers, so they can be recalled with the stroke of a key or the click of a
mouse. Data communications software must be set up, or configured, before you can use it.
8
Ten years
Advertisement
Table of Contents
Troubleshooting
