Table of Contents
Advertisement
MT2834BLR Owner's Manual
1.1
Introduction
Welcome to the world of data communications. You have acquired one of the finest intelligent data/
fax modems available today, model MT2834BLR, from Multi-Tech Systems. Your MT2834BLR
modem provides data communication at 33,600-14,400 bps (*Enhanced V.34/V.32terbo/V.32bis), as
well as other prevalent datacomm standards. The MT2834BLR also includes dial back-up with
automatic leased line restoral, adaptive protocol enhancing used in typical Unix® batch file transfers
and support for IBM's AS/400
install, configure, test and use your MT2834BLR data/fax modem.
*Note enhancements on V.34 code (33.6K/31.2K) is awaiting formal ITU approval; the ITU study
group 14 has agreed on the technical side of the proposal, with formal approval expected at the next
ITU meeting in Geneva.
1.2
Features
The MT2834BLR automatically adjusts to line conditions and the capabilities of the modem it
connects to, resulting in the highest possible speed, the most accurate error correction, and the most
efficient data compression possible for each connection. The MT2834BLR is designed for data rates
as high as 33,600 bps in full-duplex mode over public telephone lines.
MT2834BLR features include:
·
Support of data rates of 33,600, 31,200, 28,800, 26,400, 24,000, 21,600, 19,200, 16,800,
14,400, 12,000, 9600, 7200, 4800, 2400, 1200, 0-300 bps.
·
Automatic fallback to slower speeds in noisy line conditions, and fall-forward to faster speeds
as conditions improve.
·
Dial Back-Up with Automatic Leased Line Restoral.
·
ITU-T V.42 LAP-M and MNP Classes 3 and 4 error correction.
·
Data transfer rates up to 115,200 bps with V.42bis 4-to-1 data compression.
·
Automatic disabling of compression when transferring already-compressed files.
·
Serial port data rates adjustable to 115.2K bps.
·
Autodial, redial, pulse (rotary) and touch-tone dial.
·
Dial tone and busy signal detection for reliable call-progress detection.
·
Compatibility with the standard AT command set used by most communication programs.
·
On-screen help menus.
·
Nonvolatile memory for storage of customized modem parameters and ten telephone
numbers.
·
Sends and receives faxes from your computer at 14,400, 9600, 7200 or 4800 bps.
·
Responds to EIA TR.29 Class 2 fax commands.
·
Supports Unix-to-Unix® UUCP Spoofing.
·
Supports IBM's AS/400
6
TM
TM
and System3x
environment. This Owner's Manual will help you
TM
and System3x environment.
Advertisement
Table of Contents
