Mac Os 9.2.2 And Older Instructions; Where To Put The Modem Scripts (Drag And Drop Installation) - Multitech MT5634MU User Manual

6. With the desired USB terminal adapter selected in the "Configure:" (Mac OS X 10.0) or
"Show:" (Mac OS X 10.1 through 10.3) pop-up list, you are ready to finish setting up the dial-up
connection information:
7.You are now ready to use the Internet Connect application to test your dial-up
connection.

Mac OS 9.2.2 and Older Instructions

Where to put the modem scripts (drag and drop installation)

The desired modem scripts should be placed in the Modem Scripts folder. The path to the Modem
Scripts folder in Mac OS 9.x is as follows: "System Folder:Extensions:Modem Scripts". Make sure
you close the Modem control panel before installing the modem scripts, otherwise the Modem control
panel won't see the new modem scripts until it is closed and opened again.
Using a Modem Script
After the desired modem script has been installed, open the Modem control panel and select the
desired MultiTech modem script for your use.
network port and drag it to the top of the list so that a dark bar appears above all of the
other network ports. Now release the mouse button and the MTA128ST-USB will
be the primary network port when attempting a connection.
f. Now select the "Show:" pop-up list and choose your USB terminal adapter (in
this example, choose MTA128ST-USB).
a. Set up the appropriate information in the TCP/IP tab.
b. Set up the appropriate information in the PPP tab.
c. Set up the appropriate information in the Proxies tab.
d. Select the Modem tab and select the desired MultiTech modem script from the
"Modem:" pop-up list.
e. Click on the "Save" (Mac OS X 10.0) or "Apply Now" (Mac OS X 10.1 through 10.3)
button.
Mac OS 9.x Modem Control Panel
Appendix G - Multi-Tech Systems Scripts for the Mac OS
79