Installation In Windows 95; Removing Your Old Modem From Windows - Multitech MT5634MU User Manual

MultiMobile USB User Guide

Installation in Windows 95

Only Certain versions of Windows 95 offer support for USB peripherals. If you are unsure if your Win95
system supports USB, a free USB evaluation utility is available from the Shopping Bag page at
www.usb.org. Just download the utility (287K) and run the .exe application. It will determine if you have
USB support.
Note 1: If you are currently running Windows 95 on a PC with an OHCI USB controller, you will need to
upgrade to Windows 98 to install your modem. If you have any questions, contact Multi-Tech Technical
Support.
Note 2: Dialog boxes for the Windows 95 installation are not shown because they may vary depending
on the version of Windows 95 being used.
If you would like to install your MT5634MU in Windows 95, perform the following steps.
1. Insert the MT5634MU Installation CD into your CD drive.
2. If you have not already done so, connect the MT5634MU to your computer's USB port and connect
the telephone line to your MT5634MU and a telephone wall jack.
3. Windows will detect that the new modem is present and launch the Update Device Driver
Wizard dialog box. Click Next to proceed with the installation.
4. The Update Device Driver Wizard dialog box is displayed indicating that Windows has searched
for the driver on D:\ and, when identified, displays the driver name for verification. Verify that the
correct name is displayed and click Finish to install the driver.
5. Windows prompts you to insert the CD. You have already inserted the CD, so click OK to
continue.
6. The Copy Files ... dialog box is displayed. In the Copy files from field, choose D:\ from the drop-
down list and click OK.
7. When driver installation is finished, a completion message will appear, the TR LED on your modem
will light, and the wizard will exit. At this time your installation is complete. Remove the CDfrom
the computer.
Once installation is complete, you should test the operation of your new MT5634MU by registering
your MT5634MU product now. Key in the URL given below and follow the on-line instructions:
http://www.multitech.com/register

Removing Your Old Modem from Windows

When your new modem replaces another modem, the old modem installation remains in Windows
even after you install the new modem. The old modem will still be selected in HyperTerminal and other
Windows applications. Although you can change the application connection descriptions one at a
time, it is easier to force Windows applications to use the new modem by removing the old modem
from Windows.
From Windows 2000
1. Click Start | Settings | Control Panel.
2. Double-click the Phone and Modems icon and click on the Modems tab.
3. In the list box, select the old modem.
4. Click Remove, then click Close.
5. The next time you dial a HyperTerminal connection, it will select your new modem and ask you to
confirm the selection.
28
http://