Software Installation (Windows Xp/2000); Part A: Preparing The Setup - Multitech MultiModem MTCBA-G-UF1 User Manual

External wireless usb modem data/fax/voice

Hide thumbs Also See for MultiModem MTCBA-G-UF1:

Table of Contents

Software Installation (Windows XP/2000)

There are five parts to this procedure:

Part B: Installing the USB Driver

Part C: Associating the PC Port with the USB Driver

Part D: Identifying the Port Number

Part E: Installing the Modem INF File

Part A: Preparing the Setup

CAUTION!

DO NOT connect the MultiModem to the PC at this point. Follow the steps below in

sequence. Premature connection of the USB cable will cause the installation to fail.

If you have already plugged in the USB cable prematurely, cancel out of the installation wizard and

follow the instructions below.

Insert the MultiModem Product CD into your CDROM drive. Insertion of the product CD will trigger

the Autorun feature. At the MultiModem Autorun screen, click USB Installer.

2. After a brief delay (and one transient screen), the "MultiModem Setup -- Welcome" screen will appear.

Click Next.

Multi-Tech Systems, Inc. MultiModem® GPRS with USB User Guide

Chapter 2 – Installation

Table of Contents

Do you have a question about the MultiModem MTCBA-G-UF1 and is the answer not in the manual?

Multimodem mtcba-g-uf2