Table of Contents
Advertisement
6.
4mm
hen, use 7mm drill bit to enlarge the
holes on the electric motor box.
7.
8.
Attach the motor to the front of the elec-
tric motor box using four 5mm blind nut,
four M4x20mm hex head bolts to secure
the motor. Please see picture shown.
5.5mm
Blind nut
9.
M4x20mm
10.
11.
Balsa stick
Epoxy
Attach the speed control to the side of
the motor box using two-sided tape and
tie wraps. Connect the appropriate leads
from the speed control to the motor. Make
sure the leads will not interfere with the
operation of the motor.
170mm
27
Advertisement
Table of Contents
