Password Setting - Multitech IPC-623C User Manual

5-11 Password Setting

Access to the computer system in general or to the BIOS
settings in particular can be put under password protection
using this function. When you select PASSWORD SETTING on
the CMOS Setup Utility menu, the following dialog box will
appear at the center of the screen to assist you in creating a
password.
Type the password, up to eight characters in length, and press
. The password typed now will clear any previously
entered password from CMOS memory. You will be asked to
confirm the password. Type the password again and press
. You may also press
enter a password.
To disable a password, just press
prompted to enter the password. A message will confirm that the
password is to be disabled. Once the password has been
disabled, the system will boot and you can enter Setup freely.
When a password has been enabled, you will be prompted to
enter it every time you try to enter Setup. This prevents an
unauthorized person from changing any part of your system
configuration.
CommPlete Series 4000 Server SBC, Model IPC-623C
Award BIOS Setup
to abort the selection and not
when you are
73