Reload Global Timer Events - Multitech IPC-623C User Manual

Award BIOS Setup
Throttle Duty Cycle
This item allows you to select the percent of time that the clock
runs when the system enters Doze mode.
PCI/VGA Active Monitor
This item allows you to enable any video activity to restart the
global timer for Standby mode.
Soft-Off by Pwr-Bttn
Pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state when the system has "hung".
Wake Up on LAN
This item allows your computer to be booted from another
computer via network by sending a wake-up signal.
IRQ 8 Break Suspend
This item allows you to enable and disable the monitoring of
IRQ8 so it doesn't awaken the system from Suspend mode.

Reload Global Timer Events

When enabled, an event occurring on each device listed below
restarts the global timer for Standby mode.
1- IRQ[3-7,9-15], NMI
3- Primary IDE 1
5- Secondary IDE 1
7- Serial Port
66
CommPlete Series 4000 Server SBC, Model IPC-623C
2- Primary IDE 0
4- Secondary IDE 0
6- Floppy Disk
8- Parallel Port