Multitech IPC-623C User Manual page 53

Award BIOS Setup
If the controller of the hard-disk drive interface is ESDI, the
selection shall be
"Type 1".
If the controller of the hard-disk drive interface is SCSI, the
selection shall be "None"
If the controller of the hard-disk drive interface is CD-ROM, the
selection shall be "None"
Type:
Describes the hard drive. Default value is AUTO. Other values:
1-45, user, and none.
CYLS.:
Denotes the number of cylinders in the specified drive type.
HEADS:
Denotes the number of heads in the specified drive type.
PRECOM:
Precom is the read delay circuitry which takes into account the
timing differences between the inner and outer edges of the
surface of the disk platter. The number designates the starting
cylinder of the signal.
LANDZ:
LandZ is the landing zone of the heads. This number
determines the cylinder location where the heads will normally
park when the system is shut down.
SECTORS:
Denotes the number of sectors in the specified drive type.
53
CommPlete Series 4000 Server SBC, Model IPC-623C