Example 1 - Set Up A Routefinder And A Vpn Client Behind A Non-Nat Device - Multitech RouteFinder RF820 Reference Manual

Example 1 – Set Up a RouteFinder and a VPN
Client Behind a Non-NAT Device
Note: Prerequisite Steps must be completed before you start this setup.
Step 1 – Network Setup
1. Log in to your RF820 or RF830 and go to the Networks & Services screen.
2. Enter the Name of the network that you want to create for this connection.
Example: vpn-client.
3. Enter the IP Address of this new network. Example: 65.126.90.250
4. Enter the Subnet Mask for this network. The same address/mask pair should not be present
in the current list displayed on the screen.
5. Click the ADD button to add the new network
Note: Pictured below is an RF820 screen with the single WAN ports. The RF830 screen is the
same except for the addition of WAN2 and WAN2Interface Names.
Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide
Chapter 1 – Non-NAT Setup Examples
6