Multitech RouteFinder RF820 Reference Manual page 31

Chapter 2 – Behind NAT Setup Examples
Step 4 – Save and Restart
Click the Save & Restart button located just under the menu bar. The Save and Restart screen
displays.
Save to Flash Memory
If a connection is established, then the settings have been entered correctly and your basic
configuration is now complete. Now, you must save your settings to the Flash Memory; this saves the
current settings in the flash prom and prevents settings from getting lost at the next power up.
Restart
This is optional. You do not have to restart the RouteFinder after saving to the flash memory.
Step 5 – Checking the Tunnel
You can check the status of your VPN tunnel by clicking on Statistics & Logs and going to the IPSec Live Log.
You will see the connection up (if connected), and you will see the statistics related to the data being sent across
the tunnel.
Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide 31