Example 2 - Set Up Two Routefinders Behind A Nat Device; Step 1 -- Network Setup - Multitech RouteFinder RF820 Reference Manual

Example 2 – Set Up Two RouteFinders Behind
a NAT Device
Side A
Note: Prerequisite Steps must be completed before you start this setup.

Step 1 -- Network Setup

1. Log into your RF830/RF820 and go to the Networks & Services screen.
2. Create and enter in the Name, IP Address, and Subnet Mask of the Remote WAN.
3. Click the Add button to add the new network to the list
4. Create and enter in the Name, IP Address, and Subnet Mask of the Remote VPN Client.
5. Click the Add to add the new network to the list
Note: Pictured below is an RF820 with the single WAN ports. The RF830 screen is the same
except for the addition of WAN2 and WAN2Interface Names.
Once the network configuration is complete, the information about that network displays at the
bottom of the screen.
Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide
Remote-WAN 65.126.90.248
Remote-LAN 192.168.25.0
Chapter 2 – Behind NAT Setup Examples
Side B
255.255.255.255 Edit
255.255.255.0 Edit
| Delete
| Delete
25