Multitech RouteFinder RF820 Reference Manual page 11

Soho internet security appliance, ipsec vpn setup examples

Hide thumbs Also See for RouteFinder RF820:

Table of Contents

Step 2 for Side A – Packet Filters

Go to the Packet Filters screen to setup another network across the VPN tunnel with the

rights to access across the tunnel

Click on From (Host/Networks) and select the network you are allowing. Example: ANY.

Note that you should already have the LAN Any Any Accept listed.

If you are not restricting the type of service, select Any for the To (Host/Network).

Click the Add button to add the Packet Filter rule.

Important Note: Do not check the Status box. When adding a user-defined rule, leave the

Status box unchecked.

Step 3 for Side A –VPN Setup

Go to the VPN > IPSec screen.

Click the VPN Status check box to enable IPSec. Then click the Save button.

Select Add an IKE Connection by clicking the corresponding Add button.

Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide

Chapter 1 – Non-NAT Setup Examples

Table of Contents

Routefinder rf830