1. Manuals
  2. Brands
  3. Multitech Manuals
  4. Network Hardware
  5. MultiConnect SE MTS2EA
  6. Reference manual

Multitech MTS2EA Reference Manual

Mcsi and serial-to-ethernet device
Hide thumbs Also See for MTS2EA:
1
2
3
4
5
6
7

Advertisement

Table of Contents

See also: User Manual
MCSI and Serial-to-Ethernet
Device
MCSI Setup for Connection to a Serial-to-Ethernet Device
Setup Example
Reference Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MTS2EA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Multitech MTS2EA

Summary of Contents for Multitech MTS2EA

  • Page 1: Setup Example

    MCSI and Serial-to-Ethernet Device MCSI Setup for Connection to a Serial-to-Ethernet Device Setup Example Reference Guide...
  • Page 2 Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes. Revision...
  • Page 3 Login using the default login (admin) and the default password (admin). Once you are logged into the MTS2EA, you can enter the list of commands below. If you get an OK response, the command was entered correctly. If you get any other Note: response, you will have to enter the command again.
  • Page 4 Once you have read the system requirements, click Next . Click Next to accept the default folder in which this setup program will install the MCSI files. Multi-Tech Systems, Inc. MCSI and Serial-to-Ethernet Device Setup Example – A Reference Guide MCSI Setup for Connection to a Serial-to-Ethernet Device...
  • Page 5 Enter the Login user name and Password. The default Login user name is admin. The default Password is also admin. Note: Click OK to continue the installation. Multi-Tech Systems, Inc. MCSI and Serial-to-Ethernet Device Setup Example – A Reference Guide...
  • Page 6 On this screen, the first available COM port displays in the drop down list box (ex. • COM2). Select Direct for this COM port. • Then enter the Server Name/IP Address of the MTS2EA device (default is • 192.168.2.1). For Mode, select Raw. •...
  • Page 7 MTS2EA. Windows displays only the COM ports that have a physical connection. So, until the Note: MCSI is connected to your MTS2EA, you will not see the new COM port listed in the Device Manager. Testing the Connectivity Open Windows HyperTerminal.

Table of Contents