Multitech RouteFinder RF820 Reference Manual page 13

Soho internet security appliance, ipsec vpn setup examples

Hide thumbs Also See for RouteFinder RF820:

Table of Contents

Chapter 1 – Non-NAT Setup Examples

Step 4 for Side A – Save and Restart

Click the Save & Restart button located just under the menu bar. The Save and Restart screen

displays.

Save to Flash Memory

If a connection is established, then the settings have been entered correctly and your basic

configuration is now complete. Now, you must save your settings to the Flash Memory; this saves the

current settings in the flash prom and prevents settings from getting lost at the next power up.

Restart

This is optional. You do not have to restart the RouteFinder after saving to the flash memory.

Step 5 for Side A – Checking the Tunnel

To see if the tunnel is up you can click on Statistics & logs and go to the IPSec Live Log. You will

see the connection up; and if any data is being sent across, you will see that information here.

Multi-Tech Systems, Inc. RF820/830 IPSec VPN Setup Examples – A Reference Guide

Table of Contents

Routefinder rf830