Pressing the release button it is possible to move the horizontal arm in "non working position"
without unlock the exagonal bar.
Demount the Outer Bead
Position the mount/demount head against the outer edge of the upper rim lip. The plastic
surfaces should contact the rim lip.
Slide the mount/demount head in or out along the upper rail and lower the head into position.
Lock the lever. Adjust the diameter knob for correct side spacing. The mount / demount head
will automatically build in the proper vertical spacing.
Always make sure the wheel is being rotated while inserting the automatic lever.
Locate an area with a gap between the tire and wheel.
Press the wheel rotation pedal
the automatic lever into the rim / tire assembly using the control switch.
Operation Instructions for TCX50 Tire Charger
NOTICE
to rotate the wheel clockwise. While rotating, insert
Release
Button
27