Optional Clamping Jaw Extensions - Hunter TCX50 Operation Manual

2.7 Optional Clamping Jaw Extensions

The clamping jaw extension / reducers add 4 inches (102 mm) of exterior clamping OR
reduce external clamping by 5 inches (127 mm).
JAW ADAPTORS IN REDUCER
CONFIGURATION ON 6" WHEEL
The jaw adaptors may be configured for either extension or reduction by removing the two
nuts and screws from the adaptor as shown below, rotating the adaptor plate 180°, and re-
securing.
REMOVE NUTS
AND SCREWS
Operation Instructions for TCX50 Tire Charger
JAW ADAPTORS IN REDUCER
CONFIGURATION
JAW ADAPTORS IN EXTENSION
CONFIGURATION ON 26" WHEEL
JAW ADAPTORS IN EXTENSION
CONFIGURATION
ROTATE
ADAPTOR
PLATE
39