Inflator And Pressure Limiter; Mount / Demount Head - Hunter TCX575 Operation Instructions Manual

1.10 Inflator and Pressure Limiter

1.11 Mount / Demount Head

6  1. Getting Started
As a safety device, the pressure limiter prevents the operator from using excessive
air pressure.
Bead seating pressure should never exceed the tire manufacturer's maximum bead
seating pressure as stated on the sidewall of the tire.
If tires being mounted require more than the tire manufacturer's maximum bead
seating pressure, the wheel should be removed from the tire changer, placed in an
inflation cage, and inflated per manufacturer's instructions.
The mount/demount head is suspended from the column above the turntable.
The head has a mounting and demounting lip that is designed to install or remove the
bead of tire as the wheel is rotated clockwise.
In addition, the head also incorporates an automatic lever to ease the demounting
process.
MOUNTING
LIP
The mounting
lip is on the left
side of the
head.
AUTOMATIC LEVER
RETRACTED
The bead of tire is placed on top of mounting lip during mounting.
The bead of tire is placed on top of demounting lip during demounting.
The automatic lever is placed inside the tire to ease the demounting process.
AUTOMATIC LEVER
EXTENDED
Operation Instructions for TCX575 Tire Changer
DEMOUNTING
LIP
The
demounting lip
is on the right
side of the
head.
AUTOMATIC
LEVER