Leverless Version; Lockable Arm - Hunter TCX50 Operation Manual

Continue to press the wheel rotation pedal
entire bead is lifted from the rim.
Lift tire and repeat this procedure for lower bead.
Lift the mount/demount arm assembly up and away from the wheel.
Remove tire from rim.
For additional information on demounting special wheels, refer to "Advanced Demounting
Procedures," page 41.

Leverless version

Using leverless mounting head follow always this indications

Lockable arm

The leverless mounting head version is always equipped with lockable horizontal arm.
When the mounting head is not locked the horizontal arm is free to move.
Using the handle to lock the exagonal bar, the horizontal arm will be locked at the same time.
26
2 mm
1,5 mm
CHECK MOUNT HEAD
CALIBRATION MONTHLY
to rotate the wheel clockwise until the
NOTICE
LUBE
ALWAYS
ALWAYS MOUNT WITH BEAD
LUBRICATE
OVER BACK OF MOUNT HEAD
TIRE
Operation Instructions for TCX50 Tire Charger
USE ASSIST FEATURES
TO PREVENT DAMAGE