How To Use The Keying & Titling By A Remote Control; Mixer Functions - Analog way SmartEdge STE100 User Manual

How to use the keying & titling by a remote control
The titling is available by an external Remote control too (RCS/RK-300/TRK-800/ORC50/ARC200).
The Layer Selection section allows to adjust Layer size, position, transparency or transitions.
The Keying/Titling section allows to access keying and titling controls and parameters.
The Key layer has similar capabilities than any other layers.
RK-300, TRK-800, ORC50, AXION 2 and RCS allow to control any Keyed Layer.
* NOTE *: If an external control is used, it is preferable to do a Default Value before using the machine.

Mixer Functions

In Soft Edge Blending mode, the STE100 offers a variety of mixer type transitions, including wipes, slides,
fades, and cuts. The transitions, transition times and fade/slide/wipe effects can all be setup through the
STE100 Layer menu.
31