Audio Configuration - Analog way SmartEdge STE100 User Manual

Audio configuration

To configure audio settings of the STE100, plug all audio inputs into the device, and navigate to the Audio
menu.
1. Choose the audio mode, Break Away or Top Layer Follow, which you wish the audio to work in.
* NOTE *: the Break Away mode will air the selected audio source, while the Top Layer Follow mode will air
audio from the toptmost active layer of the STE100.
2. Select Source Settings from the Audio menu to select the audio source you wish to work with, then set
levels and left/right balance for each input.
3. Select Auxiliary Settings to determine level and balance of the auxiliary input.
4. In Mixer Mode, select the Main Output menu to determine main audio output level, balance and delay
settings, or to mute main audio output.
5. Select Delay Mode, to determine how the
STE100 determine audio output delay. Select Manual Adjust to determine audio delay manually.
* NOTE *: selecting Manual Adjust will give access to audio delay value (in milliseconds) of the main and
Prelist audio output menus.
STE100 deals with audio delay. Select Auto Adjust to let the
37