Freeze Button; Take Button; Effect Selection Button; Preset Selection Button - Analog way SmartEdge STE100 User Manual

Freeze button

The [FREEZE] button of the
output current display or the active input, depending on the freeze
mode: Freeze All or freeze the current selected input
PIP button
The [PIP] button of the
two available layers, PIP layer (when PIP bottom is activated) and
background live layer (when PIP bottom is not activated).
!
* NOTE *: keying and titling available with an external Remote Control.

Take button

STE100
The [TAKE] button allows to switch from Preview to Main
outputs. By pressing the
preview screen will be transitioned to the Main output display.

Effect selection button

The STE100 [EFFECT]
layer.

Preset selection button

The STE100 [PRESET]
recall a saved preset.

Adjust button

The STE100 [ADJUST]
modifying the parameters
STE100 allows users to freeze the Main
STE100 allows you to switch between the
[TAKE] button, what you have setup on your
selection button is the shortcut to the current
selection button allows you to instantly
button allows you to active layers for
[INPUT FREEZE].
25