System Commands; Real-Time Clock; Startup Delay Time - Jetter JetControl 365MC User Manual

Jetter AG

8.5 System commands

INFO

8.6 Real-time clock

Application
INFO
Factory settings
INFO

8.7 Startup delay time

INFO
User Manual – JetControl 365MC
Number Module
1 JC-3xx
2 JX2-PS1
3 JX2-ID8
4 JX2-CNT
The controller supports system commands and system registers.
Further information
For more information on this subject refer to the application-oriented manual
System Registers available for download from our homepage.
The controller is equipped with a real-time clock that keeps time and date for a
certain period of time even after the controller was deenergized
[} 21]).
You can use the real-time clock for the following function:
■ File date and time when creating a log file with time stamp
Restrictions
When using the real-time clock, the following restrictions apply:
■ When the device is de-energized the power reserve is limited.
■ The real-time clock has no automatic daylight savings time function.
At the end of the controller manufacturing process, the real-time clock is set to
the actual date and time. As the power reserve corresponds to the typical delivery
time, the as delivered condition is undefined.
Further information
For more information on this subject refer to the application-oriented manual
System Registers available for download from our homepage.
The controller supports a time delay of the boot process. You can enter the delay
time in a register.
Further information
For more information on this subject refer to the application-oriented manual
System Registers available for download from our homepage.
I/O module number
1
-
2
3
Programming | 8
Registers I/O
Refer to documentation on
JC-3xx
- -
20000300z 2000002zz
20000301z 2000003zz
(power reserve
95 / 148