E-Mail Feature - Jetter JetControl 365MC User Manual

Jetter AG

8.16 E-mail feature

Activating the email
feature
R 202930
INFO
User Manual – JetControl 365MC
The user creates template files for e-mails. Into these, the controller can enter
variables for sending, if required. This enables the automated sending of logs or
other production or maintenance-relevant information by e-mail.
The controller sends e-mails to an e-mail server which will then forward the mes-
sage to the recipient of the e-mail.
For activating the e-mail feature in the controller, the following requirements have
to be met:
■ A valid e-mail configuration file /EMAIL/email.ini must exist while the con-
troller is booting.
If this requirement has been met, the corresponding bit in the web status register
is set and the e-mail feature is available.
Web status
The register shows the available functions in bit-coded form.
Property
Type of access
Meaning of the individual bits
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 7
Tab. 51: Web status
Further information
For more information on this subject refer to the application-oriented manual File
System available for download from our homepage.
Description
Read
FTP server
1 = available
HTTP server
1 = available
E-mail
1 = available
Bit 2 is set only if the configuration file /EMAIL/email.ini
exists.
Data file function
1 = available
Modbus/TCP
1 = available
Modbus/TCP
1 = available
FTP client
1 = available
Programming | 8
101 / 148