Lauda IN 550 XT FC Operation Manual page 41

Checking the LAN network
Fig. 15: Example for entering the ping command
Check the LAN network and the process
interface
V4
1.
Start the Windows command processor by entering cmd.exe@ on
the PC with Microsoft Windows operating system.
The entry window will open.

2. There are two ways of checking:
Enter the ping command together with the IP address.
n
ping XXX.XXX.XXX.XXX@
For "XXX.XXX.XXX.XXX", put the IP address that was entered
when the Ethernet interface was configured.
Or
Enter the ping command together with the serial number of the
n
thermostatic circulator (possible with software control system
1.36 or later).
ping serial number@
If the Ethernet interface is configured and connected correctly,

the interface will return four responses within a very short time.
See Fig. 15.
It is easy to check the connection to the interface with a PC and Microsoft
Windows operating system.
For Windows 3.11 with the program "Terminal".
n
For Windows 95/98/NT/XP the program "HyperTerminal".
n
For operating systems Windows Vista, Windows 7, Windows 8 and
n
Windows 10 "HyperTerminal"* is not part of the operating system.
Integral process thermostats with flow control unit 41 / 171