Technical Data; General Data - Lauda IN 550 XT FC Operation Manual

13

Technical data

13.1

General data

Specification
Display type
Display size
Display resolution
Setting resolution
Display resolution
Entry
Installation and use
Maximum height of installation above sea level
Relative humidity
Ambient temperature range
IP protection level
Mains voltage fluctuations
Protection class for electrical equipment
DIN EN 61 140 (VDE 0140-1)
Class division according to DIN 12 876-1
‑ Class designation
‑ Identification code
Storage temperature range
Transportation temperature range
Maximum permissible pollution degree
Permissible heat transfer liquid
Possible working temperature rangeÀ
Minimum permissible electrical conductivity of
the standard tempering liquid used
Temperature stability Á
Measurement deviation
‑ at 1 l/min
‑ at 20 l/min
‑ at 70 l/min
Connector thread (outer) inflow/outflow
V4
Maximum relative air humidity 80 % at ambient tem-
perature of 31 °C and up to 40 °C, 50 % with linear
Permissible up to ±10% of the nominal voltage ---
FL (suitable for combustible and non-combustible liquids) ---
For water-cooled devices, the condenser must be com-
Integral process thermostats with flow control unit
TFT, white font on black background ---
320 x 240 Pixels
via eight keys ---
up to 2,000 m
5 – 43 °C;
pletely empty
-20 – 43 °C
Monoethylene glycol/water mixture ---
-30 – 80 °C
M30 x 1.5 ---
Value Unit
3.5 Inches
0.01 °C
0.01 °C
Indoors ---
---
decrease
5 – 40 °C
IP 21 ---
1 ---
III ---
°C
2 ---
1 μS/cm
K ±0.05
% ±3.4
% ±0.4
% ±0.3
147 / 171