Restore The Factory Setting - Lauda IN 550 XT FC Operation Manual

Restore factory calibration
6.13

Restore the factory setting

Navigate to the Factory setting menu
Reset all modules
Reset control system
Fig. 62: Factory setting menu
100 / 171
Use this menu item to restore the calibration configured in the factory.
1. Press the [Enter key] to open the menu.
2.
Select the menu items  Setup  Calibration  intern Pt1000 or
 extern Pt100  Factory calibration.
3. Select the option [yes].
4. Press [OK] to confirm the selection.
This deletes the customer's calibration and restores the calibration

as it was configured in the factory.
1. Press the Enter key to open the menu.
2.
Select the menu items  Setup  Factory setting.
With the menu [All modules], the software settings of all modules of the
device are reset to factory settings.
Further down in the Factory setting menu you can select and reset individual
modules.
In the [Control system] menu, you can reset your specific settings to factory
settings.
Reset all
n
Only control parameters
n
Other parameters
n
Reset in the [Reset all] menu:
Control
n
Control variable

Control parameters

Temperature limits
n
Basic settings
n
Sounds

Display

Autostart: On

Current consumption

Language

Calibration
n
Graphic display
n
Home window
n
Operating mode (operation)
n
Integral process thermostats with flow control unit V4