Sony Ericsson Z525i Working Instruction page 45

10. Insert the rubber plug in one of the two round holes
in the outer flip cover and press the plug down into
the hole until the outer edge of the rubber plug is
planar with the surrounding outer surface of the
outer flip cover.
NOTE!
11. Repeat the previous two steps to install the other
rubber plug that is required.
NOTE!
12. Using style 2A tweezers, grip on the rubber bushing
on each side of the vibrator and lift the vibrator from
the old outer flip cover.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
When the plug is installed correctly, the
visible portion of the plug should appear
round in shape.
Be careful not to damage the vibrator
contacts when handling the vibrator.
Working Instruction, Mechanical
45(115)