Base; Base Disassembly; Battery Cover Removal - Sony Ericsson Z525i Working Instruction

2 Base

2.1

Base Disassembly

The disassembly of the base portion of this product is broken down into sections by the
components that need to be removed to perform the disassembly. The sections that make up the
"Base Disassembly" procedure are arranged in the order that they must be performed to properly
disassemble the base portion of this product. If your task is to replace one of the components that
is removed during the base disassembly, just perform the sections of the base disassembly through
to the point that the part you are trying to replace is removed.
2.1.1

Battery Cover Removal

Tools needed to perform the following steps:
1. Close the phone so that the keypad is not accessible.
2. Dislodge the battery cover from the outer base cover
by applying force downward and outward
simultaneously to the end of the battery door that is
nearest the system connector.
NOTE!
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
The battery door can be very difficult to
remove. If the battery door will not move,
insert the angled tip of a front opening tool
into the seam where the battery cover and
the bottom edge of the speaker port come
together. Do not twist or rotate the front
opening tool once it is inserted. Just remove
the front opening tool and repeat step 2.
Working Instruction, Mechanical
•
Front opening tool
4(115)