Sony Ericsson Z525i Working Instruction page 111

8. Using the flat end of a pry tool dislodge the camera
flex film from the adhesive that is around the
receiver port.
9. Work the camera module's flex film free from the
alignment peg that protrudes through it.
10. Once the camera module's flex film is free from its
alignment peg, lift the camera module up and away
from the inner flip cover so that the camera module's
flex film becomes free of the catch just about the
display window.
NOTE!
11. Position the camera module so that the camera
portion of the module is over the top of its square
recess area on the inner surface of the new inner flip
cover.
3/00021-1/FEA 209 544/597 F
©
Sony Ericsson Mobile Communications AB
Step-by-Step Instructions
Make sure not to get finger prints, dust, or
dirt on the camera lens.
Working Instruction, Mechanical
111(115)