Xerox WorkCentre 385 Service Manual page 91

REP 4.33 Fan Motor
Removal
1. Remove the following:
a. Side Covers (REP 4.15).
b. SMPS & Engine PBA (REP 4.17).
c. Main PBA (REP 4.19).
2. Remove two screws securing the fan, unplug one connector from the Joint
PBA, then remove the fan.
Replacement
1. Reinstall the components in the reverse order.
WorkCentre 385
12/98
www.printcopy.info
4 - 41
REP 4.33 Fan Motor