Xerox WorkCentre 385 Service Manual page 78

REP 4.24 Fuser
WARNING
Fuser components are hot. Wait until components
cool before you begin work.
Removal
1. Remove the following:
a. Side Covers (REP 4.15).
2. Remove the exit guide as shown.
REP 4.24 Fuser
3. Remove the screw at the left side of the frame and unlatch the wire cap,
then remove the cap.
4. Remove four screws.
12/98
www.printcopy.info
4 - 28
WorkCentre 385