Confirming System Data Settings - Xerox WorkCentre 385 Service Manual

• RTI (Receive Terminal Identification)-This
feature allows the machine to automatically
print the page number, and the date and time
of the reception at the bottom of each page of
a received document.
• Press 1 to turn this feature on.
• Press 2 to turn this feature off.
• Priority Term - When you want to print a PC
document while the machine prints a received
fax on the recording paper, you can interrupt
the printing and print the PC document. Press
the PRINT PRIORITY button to enable the
feature. The LCD displays "PP" on the lower
line, right corner. The interrupted fax data will
be stored in memory. To disable, press the
PRINT PRIORITY button again. "PP" on the
LCD disappears.
You can set your machine to turn the feature
off automatically if there is no further data
printed within 30 minutes or 8 hours after PC
printing.
Press 1 to select 8 hours. The machine turns
off automatically 8 hours after PC printing is
completed.
Press 2 to select 30 minutes. The machine
turns off automatically 30 minutes after PC
Printing is completed.
Your machine stores the last 10
• Reprint -
pages of received fax data all the time
and updates the pages each time you
receive a fax. Use this feature to print the
last fax data.
Press 1 to enable the feature.
Press 2 to disable the feature.
• Clock Mode - Use this feature to set the clock
mode.
Press 1 to select 12 hour mode.
Press 2 to select 24 hour mode.
System Data Set-up

Confirming System Data Settings

Confirm the system data settings by printing out a
system data list.
1. If not in the tech mode, press Menu , # , 1 , 9 , 3 ,
4 in sequence to initiate the tech mode.
Press Menu .
2.
Press one of the one-touch " PRINT " keys.
3.
The LCD displays the lists you can print out.
Press Up or Down until you find " SYSTEM
4.
DATA LIST ".
5. Press Enter . The machine prints the system
data list.
The system data list printed in the tech mode
contains the system data set in the tech mode
as well as in the user mode. The model
number and software version will be printed at
the bottom of the system data list.
12/98
www.printcopy.info
6 - 18
WorkCentre 385