Xerox WorkCentre 385 Service Manual page 85

Do not touch the glass on the lamp. It will shorten the life of the lamp.
4. Remove the halogen lamp from the Heat Roller.
5. To remove the gear from the lamp, the metal terminal on the lamp must be
positioned so that it can be extracted from the center hole and slot on the
gear.
NOTE: Insure that the IPR Ground Plate is contacting the Fuser Roller
after replacement.
Replacement
1. Reinstall the components in the reverse order.
WorkCentre 385
CAUTION
12/98
www.printcopy.info
4 - 35
REP 4.28 Halogen Lamp