Xerox WorkCentre 385 Service Manual page 77

REP 4.23 HVPS PBA
Removal
1. Remove the following:
a. Side Covers (REP 4.15).
2. Remove five screws from the HVPS PBA.
WorkCentre 385
3. Unplug four connectors from the HVPS PBA, then remove the PBA.
Note: When you reassemble the HVPS PBA, make sure that the high
voltage electrodes, contacts, springs and pins are inserted correctly.
Replacement
1. Reinstall the components in the reverse order.
12/98
www.printcopy.info
4 - 27
REP 4.23 HVPS PBA