Table of Contents
Advertisement
46
46
Chapter 3 Working with the Printer Driver
Chapter 3 Working with the Printer Driver
1 Original size
Set the original size and paper direction.
B Be sure to specify the same paper direction that was set in the application used when creating the document
data.
When paper is fed with the long edge first, select a paper size whose name includes "-R".
To use a custom-size paper other than the displayed one, select [Custom] and enter its width and length in the boxes.
B You can select custom-size paper from the drop-down list by registering it beforehand.
B The range of paper sizes that can be entered in the [Custom] dialog depends on your RISO printer. For details, see the
User's Guide of your RISO printer.
B You can select the unit of size from [mm] and [inch].
[Portrait] [Landscape]
This option is used to match the paper direction with the feed direction.
Specify the page direction.
Orientation of paper: [Portrait]
Orientation of
paper
B Be sure to specify the same paper direction specified in the application on which the document was created.
Orientation of paper: [Landscape]
Orientation of
paper
(A
36)
Advertisement
Table of Contents
