6 Select [LPR] for [Protocol], set [LPR settings] as follows, and click [OK].
Input "lp" as the [Queue Name]. Select "LPR Byte Counting Enabled".
B After the LPR function is added, your computer must be restarted. Therefore, be sure to store necessary data in your
computer before performing the operation. Follow the Windows Help instructions for details.
B Images may not be printed properly if [LPR Byte Counting Enabled] is not selected.
7 Click [Next].
Chapter 2 Installing the Printer Driver
Chapter 2 Installing the Printer Driver
19
19