Table of Contents
Advertisement
48
48
Chapter 3 Working with the Printer Driver
Chapter 3 Working with the Printer Driver
– For the USB flash-via-Printer Driver
Set additional information necessary for storing data and output. The information below will be stored together with
the document data. Such information can be used to identify the data.
Clicking [Details] opens the [USB print tag] dialog.
Use an original file name:
Select to automatically use an original file name for identification on the application on which the document was
created.
Job name:
Enter an ID name if you want to have a name different from the one specified on the application on which the
document was created.
Owner name:
Input the name of the administrator of the data to be stored or output to the USB flash drive. The default is the name
of the user logged into the computer.
Folder:
Select a folder (1-6) to use for storing or printing from the USB flash drive.
Drive (Only for USB flash-via-Printer Driver):
Select the drive that the USB flash drive is connected to. The drive detected as the USB flash drive appears in the
drop-down list.
Display a message before deleting data:
Select to display a confirmation message on the control panel of your RISO printer before deleting stored data.
B You are not allowed to use the prohibited characters as follows for [Job name] and [Owner name].
Prohibited characters : \ / :, ; * ? " < > l
B With the Printer Driver for USB flash drive, when [USB print (Auto process)] is selected for [Output]
automatically deleted after printing is finished.
4 Color
After [Color information] ([Image] tab on mono-color printers
is refreshed and the information on ink colors is obtained, ink colors are automatically selected from the ink colors
mounted on the printer and the selected ink color is indicated in blue.
If the information cannot be obtained, manually select the print colors mounted on the printer.
(A
58); [Coloring] tab on dual-color printers
(A
47), the data is
(A
54))
Advertisement
Table of Contents
