Table of Contents
Advertisement
2 Paper size
Select the paper size for printing.
If you will not use scaling, select [Same as original].
If you select a paper size that is different from the original size, the image will be scaled to fit the selected paper size.
B If you select [Print position adjustment]
3 Output
Not displayed in the SF5EII Series.
For the Printer Driver
¢ This item appears when [Storage Memory] on the [Environment] tab is set to "Installed".
Print Only
Send the data to your RISO printer, and start printing in the [Auto-process].
Print & Storage
The print job is processed and the data is stored in the printer. You can reactivate the stored data on your RISO
printer anytime you like.
Storage Only
Send the data to your RISO printer to be stored. You can reactivate the stored data on your RISO printer anytime you
like.
For the USB flash-via-Printer Driver
USB print (Manual)
Data is output to the USB flash drive. You can specify a folder for storing the data in the USB flash drive.
USB print (Auto process)
Data is sent to the USB flash drive. It is printed according to the [Auto-process] setting. After master-making, the data
in the USB flash drive is automatically deleted.
(You cannot select the data storage folder in the USB flash drive. Data is stored in the [Auto process] folder.)
[Details]
– For the Printer Driver
Set additional information necessary for storing data. The information below will be stored together with the original
data. You can use this information to identify stored data.
Selecting [Print & Storage] or [Storage Only] for [Output] enables you to click [Details]. Click [Details] to open the
[Storage Tag] dialog.
(A
53), scaling will not be performed.
Chapter 3 Working with the Printer Driver
Chapter 3 Working with the Printer Driver
(A
47
47
48)
Advertisement
Table of Contents
