Unexpected Print Result - Riso MH9 Series User Manual

Unexpected Print Result

Problem
Graphics cannot be printed
properly.
Images are reduced
unexpectedly.
Some fonts cannot be
printed properly.
The page image is not
centered or is clipped at an
edge.
A solid black part on the
original is hatched for
printing.
Cause / Condition
The current [RISO...] printer driver
was not selected as active when
editing graphics.
The specified custom paper size
was so large that unexpected
margins were assigned on a page.
Are you using the correct Printer
Driver for your RISO printer?
The [Use Printer Font] option is
selected in the application.
The paper size setting in the
application is not identical with that
in the Printer Driver.
The print area specified in the
application is beyond the maximum
print area of your RISO printer.
There is something wrong with the
Drum in your RISO printer.
Is the black part set to "K 100%" in
CMYK mode?
Action
Select the current [RISO...] Printer Driver and
edit graphics again because graphics may
not be printed properly if they are edited with
another Printer Driver selected.
Select another paper size or specify a custom
paper size within the valid range.
If the name of your RISO printer is different
from the model name of your Printer Driver,
the document data cannot be printed out
correctly.
Deselect the [Use Printer Font] option in the
application.
Make both paper size settings identical.
Increase the border margins in the application
to contain the page image within the printable
area of your RISO printer.
Check your RISO printer and refer to the
dedicated user's guide.
If "K 100%" is specified in CMYK mode, a
solid black part may be hatched for printing
depending on the application used to create
the original data. Specifying "R:0, G:0, and
B:0" in RGB mode is recommended.
123 123
Chapter 7 Appendix Chapter 7 Appendix