Table of Contents
Advertisement
62
62
Chapter 3 Working with the Printer Driver
Chapter 3 Working with the Printer Driver
3 Interval printing
Not displayed in the SF5EII Series.
By allowing the printer to skip a paper feeding during printing, the ink has time to dry, preventing it from leaving marks
on the back of the next sheet.
4 Ink saving
The ink saving function of the printer is activated when this is selected. The volume of ink used for printing will be
reduced compared to normal operation.
B If [Ink saving] is selected, the printed image might be lighter or erased depending on the darkness of the original image.
5 Copies
You can use this field to specify the number of copies if no field is prepared for print quantity entry in your application.
When the number of copies can be specified in the [Print] dialog of the application, on the other hand, you can ignore
this setting because it has no effect on printing operation.
6 Auto-Process
You can specify how to process your print jobs on your RISO printer, such as completing them without interruption
or interrupting them after a specified process step. By interrupting your print jobs, you can check print position and
quality with test prints before the printing process or change the print job flow according to your print requirements.
The available process flows are as follows.
ON:
Complete print jobs without operator involvement on your RISO printer. No pause is made between master-making
and printing processes until the end of print jobs.
Pause before "Master-making":
Interrupt print jobs before each master-making process, thus allowing you to handle a stack of printed copies,
especially for duplex printing. You can view the page image on the LCD of the printer to check what you are about to
print.
Pause before "Print":
Interrupt print jobs before each printing process, thus allowing you to check a sample print.
OFF:
Interrupt print jobs before each process step, such as both master-making and printing processes.
B For the Printer Driver, [Auto-process] is available only when you select [Print Only].
setting is not valid for [Storage Only].) For stored data, set the [Auto-process] mode from the printer display
when the data is retrieved.
B [Slip sheet sorting mode]
B For the USB flash-via-Printer Driver, master-making/printing is executed according to the [Auto-process] setting made
here when [Output]
or [OFF] is selected, master-making does not start automatically.
7 Slip sheet sorting mode
Inserts a slip sheet (blank page) from the multi-tray feeder of the printer into every printing interval. Set the timing of
slip sheet insertion.
Open
OFF
ON Between jobs
ON Between Pages : Inserts a slip sheet between every page.
B This cannot be used with [High speed] and [Job separator].
B This can be set when [Auto-Process]
(A
62) and [Job separator]
(A
47) is set to [USB print (Auto process)]. For that reason, when [Pause before "Master-making"]
: Follows the printer settings.
: Does not insert slip sheets.
: Inserts a slip sheet between every job.
(A
62) is set to [ON].
(A
65) can be set only when this is set to [ON].
(A
47) (The
Advertisement
Table of Contents
