Table of Contents
Advertisement
[Combination print]:
With combination print, the original data is automatically colored in two (on the assumption: color 1 of black and color
2 of red), the data is transmitted to your RISO printer and master making is performed. The printer will stop after
master making is performed. Use the Combination print screen in the printer control panel to set the number of copies
and press the start key.
[Use color separated data]:
[Use color separated data] uses the original color-separated data and prints it.
This option makes masters of odd pages with Drum (Cylinder) 1 and even pages with Drum (Cylinder) 2, therefore the
first and second pages of the original are printed on the first copy, and the third and fourth pages of the original are
printed on the second copy. When the total number of the original pages is odd, the master of the last page is made
with Drum (Cylinder) 1 and no master is made with Drum (Cylinder) 2.
Original
A
B
First page
Second page
Print
A
B
First page
Second page
3 Color information
¢ [IP address of the printer] on the [Environment] tab
By clicking the [Refresh] button, the color information of the Drums (Cylinders) mounted in your RISO printer will be
applied in the RISO Printer Driver.
The acquisition status (Complete/Error) of color information is displayed. In case of "Complete", the text of the Ink
Color of the printer driver will be indicated in blue.
4 Preview and Edit
[Basic] Tab - [Preview and Edit]
B Print image:Based on the settings in the [Coloring] tab, the image of the documentation data and print will be displayed.
The images are different from the actual documentation data and prints.
C
Third page
C
E
D
Third page
(A
50)
E
D
Fourth page
Fifth page
(A
35) must be set.
Chapter 3 Working with the Printer Driver
Chapter 3 Working with the Printer Driver
57
57
Advertisement
Table of Contents
