Dynamic DX Power Module PMB Installation Manual page 72

 0DLQWHQDQFH
1. The DX System should be regularly checked for integrity. Loose, damaged or
corroded connectors or terminals, or damaged cabling should be replaced.
2. All switchable functions on the DX System should be regularly tested to ensure
they function correctly.
3. All DX system components should be kept free of dust, dirt and liquids. If
necessary wipe with a cloth dampened with warm water or alcohol. Do not use
solvents or abrasive cleaners.
4. Where any doubt exists, consult your nearest Service Centre or Agent.
5. There are no user-serviceable parts in any DX System component - do not
attempt to open any case.
Warning : If any DX component is damaged in any way, or if internal damage
may have occurred (for example by being dropped), have it checked by qualified
personnel before operating.
67
 0DLQWHQDQFH