With the Wizard's "Create a new Chair Program" option, you can set up the
standard parameters for the PM and any other modules used for a particular
wheelchair. This Chair Program is then saved to disc under a name such as
"SuperChair, Deluxe" and can be down loaded to the DX System at the push of a
button.
([DPSOH
Modify/Edit the "SuperChair, Deluxe" Chair Program as follows.
1.
Enter the Wizard's Main Menu screen as described in the Wizard
Installation Sheet.
2.
Use the keyboard or the mouse, to select 'Edit Wheelchair Library' menu
option.
3.
Select either 'Edit Standard Wheelchair Program', or 'Edit Custom
Wheelchair Program', as appropriate.
4.
Select the "SuperChair, Deluxe" program.
5.
Select the 'Edit Module Parameters' menu option.
6.
Select 'Power Module'.
7.
Scroll through the list of parameters and adjust as necessary.
8.
Press «Enter» to accept the changes, or «Esc» to exit without saving. Select
'Write Program to Library' option and press «Enter». These values will then
be part of the Standard Chair Program for the "SuperChair, Deluxe".
39
3URJUDPPLQJ
Need help?
Do you have a question about the DX Power Module PMB and is the answer not in the manual?