Dynamic DX Power Module PMB Installation Manual page 57

 3URJUDPPLQJ
2. Then the main menu screen reads :
Pressing NEXT cycles through the Drive Programs. Refer to the DX Remote
Installation Manual for details of how to view and adjust Drive Programs.
7R (QDEOH 7HFKQLFLDQ 0RGH
1. Press 'NEXT' until the Technician Mode screen appears :
Pressing 'YES' toggles this screen between Technician Mode Enabled and
Technician Mode Disabled. If disabled, press 'YES' to enable.
2. Press 'YES' and a password screen will appear. Enter the three digit password.
Press the D1, D2 and D3 buttons to cycle each digit through to the correct
password. When the password reads correctly, press the 'EXIT' button.
The screen now reads :
* * MAIN MENU * *
View or edit?
Program : 1 ?
NEXT
* * MAIN MENU * *
Technician Mode
disabled. Enable ?
NEXT
Technician Mode
Enter Password
0 0 0
EXIT D1 D2
* * MAIN MENU * *
Technician Mode
enabled. Disable ?
NEXT
52
YES
YES
D3
YES